Electrical Continuing Education &
Electrical License Renewal Services
Menu
  • Call Us Toll Free
    (855) LOG-CEUS
  • Email Us
    Support@

NM Electrical Continuing Education Course

NEC 2020 Code Changes Update

Approved by the New Mexico Construction Industries Division for New Mexico Electricians License Renewal.

Yes! We Are Approved by the New Mexico Construction Industries Division for New Mexico Electricians' License Renewal.

Electrical Online Course Name Credit Hours Credit Type Course Number Course Availability Course Price
NEC 2020 Code Changes Update16.0 Code Change 2020-12 3/15/2023
-through-
2/16/2026		 $149
-50
$99
This New Mexico Electrical Continuing Education License Renewal Course reviews the most important updated 2020 NEC Changes in detail. This course will earn you 16 hours of Code Change electrical continuing education for your electrical license renewal with the New Mexico Construction Industries Division. The NM CID has approved this course for 2020 license renewal. In this course we will review the top 150 sections of the most important National Electrical Code Changes in 2020; From Article 100 to Chapter 7 is covered.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
NEC 2020 Code Changes Update Course Topics:
  • Article 100 Accessible as Applied to Equipment.
  • Article 100 Attachment Fitting.
  • Article 100 Bonding Jumper, Main.
  • Article 100 Bonding Jumper, Supply-Side.
  • Article 100 Class 1, 2 and 3 Circuits.
  • Article 100 Fault Current & Available Fault Current.
  • Article 100 Free Air (as applied to conductors).
  • Article 100 Habitable Room.
  • Article 100 Laundry Area.
  • Article 100 Receptacle.
  • Article 100 Reconditioned.
  • 110.12(C) Mechanical Execution of Work. Cables and Conductors.
  • 110.14(D) Terminal Connection Torque.
  • 110.21(A)(2) Reconditioned Equipment.
  • 110.22(A) Identification of Disconnecting Means. General.
  • 110.24(A) Field Marking.
  • 110.26(C)(2) Large Equipment.
  • 110.26(C)(3) Personnel Doors.
  • 110.32 Workspace About Equipment.
  • 210.5(C)(1) Branch Circuits Supplied from More Than One Nominal Voltage System.
  • 210.6(C) 277 Volts to Ground.
  • 210.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  • 210.8(A) GFCI Protection. Dwelling Units.
  • 210.8(B) GFCI Protection. Other Than Dwelling Units.
  • 210.8(D) GFCI Protection for Specific Appliances.
  • 210.8(E) Equipment Requiring Servicing.
  • 210.8(F) GFCI Protection. Outdoor Outlets.
  • 210.11(C)(3) Bathroom Branch Circuits.
  • 210.11(C)(4) Garage Branch Circuits.
  • 210.12(C) AFCI Protection in Guest Rooms, Guest Suites, and Patient Sleeping Rooms in Nursing Homes and Limited-Care Facilities.
  • 210.12(D) AFCI Protection. Branch Circuit Extensions or Modifications in Dwelling Units, Dormitory Units, Guest Rooms and Guest Suites.
  • 210.15 Reconditioned equipment.
  • 210.19(A)(1) Branch Circuits.
  • 210.25(B) Common Area Branch Circuits.
  • 210.52(B)(1) Receptacle Outlets Served.
  • 210.52(C) Countertops and Work Surfaces.
  • 210.52(C)(2) Island and Peninsular Countertops and Work Surfaces.
  • 210.52(C)(3) Receptacle Outlet Location.
  • 210.52(E)(3) Balconies, Decks, and Porches.
  • 210.52(G) Basements, Garages, and Accessory Buildings.
  • 210.63 Equipment Requiring Servicing.
  • 210.70(A)(1) Lighting Outlets Required. Habitable Rooms.
  • 210.70(A)(2) Lighting Outlets Required. Additional Locations.
  • 210.70(B) Lighting Outlets Required. Guest Rooms or Guest Suites.
  • 210.70(C) Lighting Outlets Required. All Occupancies.
  • 215.9 Ground-Fault Circuit-Interrupter Protection for Personnel.
  • 215.10 Ground-Fault Protection of Equipment.
  • 220.12 Lighting Load for Non-Dwelling Occupancies.
  • 220.14(J) Dwelling Units.
  • 220.53 Appliance Load. Dwelling Unit(s).
  • 225.10 Wiring on Buildings (or Other Structures).
  • 225.30(B) Common Supply Equipment.
  • 230.43 Wiring Methods for 1000 Volts, Nominal, or Less.
  • 230.46 Spliced and Tapped Conductors.
  • 230.62 Service Equipment Barriers.
  • 230.66 Marking.
  • 230.67 Surge Protection.
  • 230.71 Maximum Number of Disconnects.
  • 230.75 Disconnection of Grounded Conductor.
  • 230.82 Equipment Connected to the Supply Side of Service Disconnect.
  • 230.85 Emergency Disconnects.
  • 240.6 Restricted Access Adjustable-Trip Circuit Breakers.
  • 240.21 Feeder Taps.
  • 240.24(A) Accessibility.
  • 240.33 Vertical Position.
  • 240.62 Reconditioned Equipment.
  • 240.67 Arc Energy Reduction.
  • 240.86 Series Ratings and Motor Contribution.
  • 240.87(A) & (B) Arc Energy Reduction. Documentation and Method to Reduce Clearing Time.
  • 240.87(C) Performance Testing.
  • 240.88 Reconditioned Equipment.
  • 240.102 Overcurrent Protection over 1000 Volts, Nominal. Reconditioned Equipment.
  • Article 242 Overvoltage Protection.
  • 250.25 Grounding Systems Permitted to Be Connected on the Supply Side of the Disconnect.
  • 250.28(A) Main Bonding Jumper and System Bonding Jumper. Material.
  • 250.53(C) Bonding Jumper.
  • 250.64(A) Aluminum or Copper-Clad Aluminum Conductors.
  • 250.64(B) Exposed to Physical Damage.
  • 250.64(E) Raceways and Enclosures for Grounding Electrode Conductors.
  • 250.104(A) Metal Water Piping.
  • 250.109 Metal Enclosures.
  • 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
  • 300.3(B)(1) Paralleled Installations.
  • 300.15(F) Fitting.
  • 310.1 Scope.
  • 310.10(B) Dry and Damp Locations.
  • 310.12 Single-Phase Dwelling Services and Feeders.
  • 310.15(B) Ambient Temperature Correction Factors.
  • 310.16 Ampacity Table.
  • Article 311 Medium Voltage Conductors and Cable.
  • 312.6 Deflection of Conductors.
  • 314.16(B)(5) Equipment Grounding Conductor Fill.
  • 314.27(C) Boxes at Ceiling-Suspended (Paddle) Fan Outlets.
  • 314.29 Boxes, Conduit Bodies, and Handhole Enclosures to Be Accessible.
  • 330.80(C) Thermal Insulation.
  • 330.130 Hazardous (Classified) Locations.
  • 334.104 Conductors.
  • 338.2 Definitions.
  • 338.10(B)(4) Installation Methods for Branch Circuits and Feeders.
  • 350.10 Uses Permitted.
  • 366.23 Ampacity of Conductors.
  • 392.18(H) Marking.
  • 392.44 Expansion Splice Plates.
  • 392.46 Bushed Conduit and Tubing.
  • 404.14(E) Dimmer and Electronic Control Switches.
  • 406.5(G) Receptacle Orientation.
  • 406.9(C) Bathtub and Shower Space.
  • 406.12 Tamper-Resistant Receptacles.
  • 406.13 Single-Pole Separable-Connector Type.
  • 408.4(A) Circuit Directory or Circuit Identification.
  • 408.6 Short-Circuit Current Rating.
  • 408.8 Reconditioning of Equipment.
  • 408.18(C) Connections.
  • 408.43 Panelboard Orientation.
  • 410.7 Reconditioned Equipment.
  • 410.10(D) Bathtub and Shower Areas.
  • 410.69 Identification of Control Conductor Insulation.
  • 410.118 Access to Other Boxes.
  • 410 Part XVI. Special Provisions for Horticultural Lighting Equipment.
  • 410.176 Locations Not Permitted.
  • 422.5 Ground-Fault Circuit-Interrupter (GFCI) Protection for Personnel.
  • 422.16(B)(2) Built-in Dishwashers and Trash Compactors.
  • 422.16(B)(4) Range Hoods and Microwave Oven/Range Hood Combinations.
  • 440.9 Grounding and Bonding.
  • 445.18 Disconnecting Means and Emergency Shutdown.
  • 450.9 Ventilation.
  • 480.7(B) and 480.7(C) Battery System Disconnection.
  • 517.10(B) Not Covered.
  • 517.30(C) Location of Essential Electrical System Components.
  • 518.6 Illumination.
  • Article 545 Manufactured Buildings and Relocatable Structures.
  • 590.4(G) Splices.
  • 590.8 Overcurrent Protective Devices.
  • 600.4(D) Visibility.
  • 600.6(A)(4) Disconnect. Remote Location.
  • 620.65 Signage.
  • 625.1 Scope.
  • 625.48 Interactive Systems.
  • 680.4 Inspections After Installation.
  • 680.21(C) & 680.21(D) GFCI Protection.
  • 680.22(A)(5) Pool Equipment Room.
  • 680.26(B)(2) Perimeter Surfaces.
  • 690.9(B) Device Ratings.
  • 690.12(B)(2) Rapid Shutdown. Inside the Array Boundary.
  • 690.31(C) Cables.
  • 690.31(D) Direct-Current Circuits on or in Buildings.
  • 700.12(I)(2) Installation of Unit Equipment.
  • 700.16 Emergency Illumination.
  • 705.12 Load-Side Source Connections.
  • 725.144(B) Use of Class 2-LP or Class 3-LP Cables to Transmit Power and Data.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
Other NM Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course
NEC 2023 Code Changes Update Banner
NEC 2023 Code Changes Update
Course #: 2023-047
Credit Type: Code Change
Credit Hours: 16.0
Price: $149
 
NEC 2020 Code Changes Update Banner
NEC 2020 Code Changes Update
Course #: 2020-12
Credit Type: Code Change
Credit Hours: 16.0
Price: $149
 
NEC 2023 Code Changes Update part 1 Banner
NEC 2023 Code Changes Update part 1
Course #: 2023-105
Credit Type: Code Change
Credit Hours: 8.0
Price: $69
 
NEC 2023 Code Changes Update part 2 Banner
NEC 2023 Code Changes Update part 2
Course #: 2023-106
Credit Type: Code Change
Credit Hours: 8.0
Price: $69

About ElectricalLicenseRenewal.com

Electrical License Renewal Logo

We want to be your lowest priced, easiest to use, and most educational course provider. It is free to try and the cheapest. Let's renew your Electrical license together!

Quick Links

We are on Twitter

Happy Renewers

© 2025 ElectricalLicenseRenewal.com. All Rights Reserved